Specifications
General Section
Connector
XLR-3-12C (male)
Mic Cable
XLR 3-pin Cable Required (Not Supplied)
Power Requirements
DC 44 to 52 V
Dimensions
Approx. 40 mm (1.57 in.) dia. × 158 mm (6.22 in.)
Mass
Approx. 215 g (7.6 oz)
Supplied Accessories
Cradle suspension (1), Operating instructions (1), Carrying case (1)
Audio Section
Capsule Type
Condenser Microphone
Frequency Response
20Hz-20kHz
Directivity
Uni directional
Sensitivity
-30 dB (deviation ±3 dB) (0 dB=1 V/Pa, 1 kHz)
Output Impedance
90Ω±15%, Balanced
Dynamic Range
More than 125.5 dB
Signal-to-Noise Ratio
81.5 dB
Inherent Noise
Less than 12.5 dB SPL (0 dB=2 × 10-5 Pa) (IEC* 61672-1 A-Weighted, 1 kHz, 1 Pa)
Maximum Input Sound Pressure Level
More than 138 dB SPL (output level for 1%waveform distortion at 1 kHz, converted into equivalent input sound pressure level: 0 dB=2 × 10-5 Pa)
